Using 3M™ Scotchbond™ Universal Plus Adhesive and 3M™ RelyX™ Universal Resin. Cement
Posterior restorations are challenging: many different materials can be used, direct or indirect. In this clinical case, a young patient had a debonded crown on second upper premolar and two failed restorations in first upper molar and first upper premolar. When we face multiple restoration, indirect approach should be considered. Adhesive partial restorations were made of lithium disilicate and crown of full-contour zirconia. Different materials, different indications but only one cement for all was used.
Initial situation and field isolation with rubber dam.
First molar amalgam and first premolar composite removal and cleaning of cavities.
CAD/CAM lithium disilicate partial restorations in 3D printed model.
Pre-treatment with HF, rinse with water, 3M™ Scotchbond™ Universal Plus Adhesive and 3M™ RelyX™ Universal Resin Cement application.
Upper molar and upper premolar partial restorations adhered.
Preparation of finish line on upper second premolar.
Full-contour zirconia crown in two different views.
Pretreatment sandblasting with 30 µm Al2O3, cleaning with ethanol and 3M™ RelyX™ Universal Resin Cement application.
Result after cementation.
Refer to Instructions for Use (IFU) for complete product information. Results may vary.
Using 3M™ Single Bond Universal Adhesive, 3M™ Filtek™ Supreme Flowable Restorative, 3M™ Filtek™ Universal Restorative, 3M™ Elipar™ Deep Cure-S LED…
Using 3M™ Scotchbond™ Universal Adhesive, 3M™ Filtek™ One Bulk Fill Restorative, and the 3M™ Sof-Lex™ Spiral Finishing and Polishing system.
Using 3M™ Protemp™ 4 Temporization Material, 3M™ Scotchbond™ Universal Plus Adhesive, and 3M™ RelyX™ Universal Resin Cement.
