Dentistry Today

DECEMBER 11, 2023

Indicated for printing single crowns, inlays, onlay, and veneers, Pac-Dent’s Rodin Sculpture is an FDA 510(k) cleared Class II medical device that fulfills all necessary regulatory requirements for permanent and temporary restorations.

3D printing 278

3D printing Teeth whitening Insurance Endodontics 278

Dimensions of Dental Hygiene

DECEMBER 12, 2023

LAS VEGAS, NV (November 28, 2023) — Clinux CAD, the world’s first cloud-based CAD software designed for dentists, launches three innovations, expanding its range of possibilities for customers: New indication: Inlay/Onlay Dentists have a growing desire to 3D print their inlays and onlays.

3D printing 52

3D printing 52

Dentistry Today

MAY 30, 2023

Dental practices commonly release microplastics into municipal wastewater from dental procedures such as removing and adjusting restorations or by milling and grinding crowns, inlays and onlays. The amount of microplastics generated per procedure is small, but it occurs frequently.

Manufacturers - dental products and materials 147

Manufacturers - dental products and materials Dental procedures 147

Broomfield Dentists / MountainAire

MARCH 16, 2023

Inlays and onlays- Sometimes a cavity is too big for a filling, but too small for a crown. In a case like this, your dentist might recommend an inlay or onlay. Inlays and onlays are similar. While an inlay fills the area between the cusps of your teeth, an onlay also covers at least one cusp.

Restorative dentistry 78

Restorative dentistry Dental implants Dentures 78

Dental News and Technology

MARCH 24, 2023

With Planmeca PlanMill 35, dental practices can fabricate a wide range of dental restorations efficiently and precisely in both wet and dry milling modes, including crowns, inlays, onlays, veneers and up to six-unit bridges.

Veneers 130

Veneers Marketing 130

Dentistry Gone Digital

APRIL 17, 2023

Do I have design freedom-aka-veneer versus inlay versus onlay versus crown? All veneers-inlays and most onlays (ceramic) need to be cemented in an adhesive manner. Have the Patient’s Ideal End in Mind Begin with the patient’s ideal end in mind: How beautiful does their indirect restoration need to be?

Veneers 130

Veneers Endodontics 130

Broomfield Dentists / MountainAire

JULY 15, 2022

Inlays and onlays: Inlays and onlays are custom-made, tooth-colored fillings that can repair teeth that have damage or decay. Dental Crowns: A dental crown is a custom-made, tooth-shaped cap that is placed over a damaged or decayed tooth.

Cosmetic dentistry 80

Cosmetic dentistry Teeth whitening Veneers Dental procedures 80

Dentistry Today

JUNE 28, 2023

Stratasys TrueDent is a light-curable resin indicated for the fabrication of dental appliances including removable full and partial dentures, denture bases, denture teeth, bridges, crowns, inlays, onlays, and veneers in dental laboratories.

3D printing 147

3D printing Manufacturers - dental products and materials Dentures Social media 147

Gilreath Dental

OCTOBER 10, 2022

Services Provided By Cosmetic Dentistry Inlays and Onlays Indirect fillings, a dental laboratory created,… The post What Services Does Cosmetic Dentistry Provide? Seven while aesthetic dentistry procedures are often optional and not necessary, there are circumstances in which they offer restorative benefits.

Cosmetic dentistry 52

Cosmetic dentistry 52

3M

APRIL 12, 2023

Partial Indirect restorations such as inlays, onlays, partial crowns and table-tops are conservative treatment options that restore the function and esthetics of posterior teeth. In the Indirect procedures, it is essential to preserve as much natural tooth structure as possible without compromising the outcome.

52

52

Dentistry Today

JANUARY 2, 2024

Dental 3D printing is utilized for various components, including dentures, tooth models, aligners, crowns, surgical implants, inlays, onlays, overlays, operational guides, bespoke models, and surgical equipment.

3D printing 162

3D printing Marketing Manufacturers - dental products and materials Robotics 162

Dentistry Today

JANUARY 30, 2024

million dental restorations using CEREC CAD/CAM technology, and over 427,000 dental restorations (crowns, inlays/onlays, and veneers) in 2023 alone. Since launch, over 87.8 million patient records have been exchanged between PDS-supported clinicians and other healthcare organizations. Surpassed the lifetime milestone of 3.75

Dental hygienists 147

Dental hygienists Veneers Marketing Dental assistants 147

Off the Cusp

AUGUST 29, 2023

Indications: Zirconia crowns and bridges Composite inlays, onlays, crowns, and bridges Lithium disilicate inlays, onlays, and crowns Metal and PFM crowns and bridges Recently, 18 clinical evaluators with Catapult Education assessed GC FujiCEM® Evolve.

Marketing 52

Marketing 52

Dental News and Technology

JULY 12, 2021

The vital teeth with prosthetic restorations (N=454), including cast inlays, onlays, crowns, and fixed partial dentures, of 53 patients were assessed from dental charts and radiographs.

Endodontics 100

Endodontics Dentures 100

Broomfield Dentists / MountainAire

MARCH 15, 2024

Fillings, dental crowns, or inlays/onlays can be used to repair damaged teeth and restore their strength and integrity. Here are some common situations where dental restoration may be needed: 1. Tooth Decay: Dental restoration is often required to treat cavities caused by tooth decay.

Veneers 84

Veneers Clear aligners Dental implants Dentures 84

3M

OCTOBER 27, 2021

The aim of this entertaining online seminar is to address various clinically relevant aspects in the realization of indirect adhesive restorations such as veneers, inlays, onlays, tabletops, crowns and adhesive bridges in order to enable the prosthetic colleague to work successfully, stress-free and safely.

Veneers 52

Veneers 52

3M

MARCH 15, 2022

During the lecture, indications and contraindications for the use of root canal posts, direct composite and indirect partial restorations (inlays, endocrowns, onlays) and the latest studies related to the prognosis of postendodontic restorations and non-vital teeth will be presented.

52

52

Off the Cusp

JUNE 27, 2022

Traditional crowns, inlays, onlays, and veneers are still popular options, but now patients also can leave with multiunit restorations, implants, aligners, and nightguards. Through this process, dentists can create customized veneers, inlays, onlays, crowns, abutments, and bridges while the patient waits.

Manufacturers - dental products and materials 98

Manufacturers - dental products and materials Social media Veneers Marketing 98

Dentistry Today

AUGUST 10, 2023

This new resin can be used to fabricate permanent full-contour crowns, inlays, onlays, and veneers. It is an FDA 510(k)-cleared, biocompatible, light-curable resin designed to be used with specific CAD/CAM systems in combination with manufacturer-validated 3D printing and light-curing devices.

3D printing 246

3D printing Manufacturers - dental products and materials Dentures Prosthodontics 246

Off the Cusp

FEBRUARY 9, 2022

Material performance was evaluated in full-contour single-unit restorations, including crowns, inlays, onlays, and veneers. The performance of CEREC Tessera blocks has been measured using standardized in-vitro tests. In tests, CEREC Tessera blocks demonstrated >700 MPa.

Veneers 98

Veneers Restorative dentistry 98

Dentistry Gone Digital

JULY 11, 2023

Off-topic, yet for completeness’ sake, I use it for inlays, onlays, and veneers. Learn More: Keep Reading about Zirconia Lithium Disilicate vs Zirconia: What’s My Go-To? Lithium Disilicate is my workhorse. I use it for anterior and posterior crowns. I use it for partial crowns.

Veneers 190

Veneers 190

Denticle

JUNE 7, 2023

Dental practices commonly release microplastics into municipal wastewater from dental procedures such as removing and adjusting restorations or by milling and grinding crowns, inlays and onlays. The amount of microplastics generated per procedure is small, but it occurs frequently.

Manufacturers - dental products and materials 52

Manufacturers - dental products and materials Dental procedures 52

Denticle

MAY 3, 2022

a leading developer and manufacturer of high-tech dental materials, is announcing UltraTempTM REZ II temporary dental cement for temporary crowns, bridges, inlays, onlays, and small temporary fillings. Ultradent Products, Inc.,

Manufacturers - dental products and materials 40

Manufacturers - dental products and materials 40

Dental News and Technology

DECEMBER 8, 2020

is a tooth-colored, ceramic-filled resin for 3D printing permanent single crowns, inlays, onlays, and veneers. Permanent Crown Resin, whose digital workflow is developed in partnership with ?BEGO?,

Restorative dentistry 130

Restorative dentistry 3D printing Manufacturers - dental products and materials Veneers 130

Dental News and Technology

MARCH 30, 2022

The CAD/CAM process includes the digital image, design, mill and cement of a natural-looking dental crown, inlay/onlay, or veneer on the same day, reducing the number of visits patients need to make to their dentist.

Modern dentistry 100

Modern dentistry Endodontics Veneers Restorative dentistry 100

Off the Cusp

APRIL 17, 2024

The right milling machines enable the production of crowns, veneers, and inlays/onlays with remarkable efficiency and accuracy, especially with today’s material options. CAD/CAM Milling: Crafting Precision in Real-Time We’ve been milling 70% of our restorations chairside for 20 years.

3D printing 52

3D printing Modern dentistry Laser technology Endodontics 52

Denticle

JANUARY 26, 2023

The crowns, inlays, and onlays that the mill produces are incredible! In our 10 months with it, all we have had to do is replace some burs and change filters (both of these items are part of routine disposables/maintenance). We have paired the machine with exocad design software to design the restorations.

52

52

Dental News and Technology

JANUARY 12, 2022

Producing and placing 468,211 dental restorations (crowns, inlays/onlays, and veneers) in 2021 alone using CEREC ® CAD/CAM technology. Implementing CBCT technology in 365 supported practices and using 3D imaging to help more patients with improved diagnoses, precise implant placements, and better clinical outcomes.

Pediatric dentistry 130

Pediatric dentistry Modern dentistry Veneers Periodontics 130

Dentistry Gone Digital

JULY 11, 2023

Off-topic, yet for completeness’ sake, I use it for inlays, onlays, and veneers. Learn More: Keep Reading about Zirconia Lithium Disilicate vs Zirconia: What’s My Go-To? Lithium Disilicate is my workhorse. I use it for anterior and posterior crowns. I use it for partial crowns.

Veneers 130

Veneers 130

Denticle

APRIL 18, 2023

SprintRay Crown™ is a ceramic-filled hybrid material for 3D printing permanent single crowns, inlays, onlays, and veneers. "The expansion of the partnership with SprintRay and the introduction of SprintRay Crown will further accelerate this trend."

3D printing 52

3D printing Manufacturers - dental products and materials Prosthodontics Veneers 52

Off the Cusp

JUNE 30, 2023

The newest member of Kuraray’s PANAVIA family, PANAVIA Veneer LC, is a light-cure formulation for cementation of ceramic veneers, inlays, and onlays that offers excellent color stability, high wear resistance, provides ample working time, and offers fast and easy cleanup.

Veneers 52

Veneers 52

Best Dentist in Houston

APRIL 25, 2024

” Inlays and Onlays : These are custom-made fillings used to repair moderately damaged or decayed teeth, providing a natural-looking restoration.

Cosmetic dentistry 52

Cosmetic dentistry Teeth whitening Veneers Clear aligners 52

Denticle

MAY 11, 2021

The mill can create crowns, bridges, inlays, onlays, temporaries, dentures veneers, implant abutments, and implant supported bars, just to name some of the restorations possible. I have also been incredibly impressed with the support the company has provided.

Dentures 52

Dentures Veneers 52

Denticle

SEPTEMBER 27, 2023

Bego Crown Resin is a high-quality, durable resin that is ideal for printing permanent crowns, inlays, and onlays. This decision is being made to streamline SprintRay's product offerings and focus on the most popular and innovative resins. It is also radiopaque, making it easy to see on X-rays.

3D printing 40

3D printing 40

Secure Smiles

JULY 17, 2021

We can discuss potentially updating those restorations with more attractive ones, such as white fillings, porcelain inlays/onlays, or similar treatments. . — Perhaps you have outdated, stained, or metal fillings that are detracting from your smile’s appearance. Visit Our Premier Prosthodontist.

Teeth whitening 78

Teeth whitening Cosmetic dentistry Veneers 78

Denticle

JUNE 2, 2022

It is indicated for permanent cementation of aesthetic veneers and can also be used for inlays and onlays less than 2mm thick. PANAVIA™ Veneer LC is an advanced light-cure resin cement with excellent color stability, high wear resistance, provides ample working time, and offers fast and easy cleanup.

Veneers 40

Veneers Marketing 40

Perfect White Smile

NOVEMBER 29, 2020

Inlays and onlays. Full mouth restoration often involved both restorative and cosmetic treatments, including: Dental implants. Dental bridges. Porcelain veneers. Professional teeth whitening. Composite resin dental bonding. Dental crowns. Dental fillings. Which treatments do I need? During the first appointment with Dr. David S.

Teeth whitening 52

Teeth whitening Veneers Dentures Dental implants 52